2015年7月21日星期二

How to Solve the Problem of Conveyor Belt Skid?

The main cause of conveyor belt skid is that the friction between conveyor belt and pulley is not enough, details please see the following three aspects:

1.The running resistance is increased, such as conveyor overloads, conveyor belt is squeezed and stuck on the frame, roller damages, stuff twines, material buries etc. will cause lots of rollers can not rotate well.
Solution: conveyor overload is strictly prohibited, the conveying capacity must be designed within the theoretical range ; Replace the roller which can not rotate flexibly; Fully check the entire transportation process, eliminate the bad affecting factors.


fertilizer conveyor belt site
 
2.The friction coefficient is reduced, for example, the contact area of driving drum and belt enters into water, sundry. Rubber coated surface of driving pulley damages.
Solution: replace the driving pulley and clean the stuff that on the non-working conveyor belt surface.

conveyor belt slip detector

3.The conveyor belt tension is reduced, for example, if the conveyor belt overload works for a long time, the belt will be deformed and stretched, besides, the tension of take-up device is not enough which will leads the tensile force decreases.
Solution: increase the tensioning stroke according to the working conditions, you can also cut off a piece of conveyor belt to solve the problem when the tension is not enough.


conveyor belt tension device


--------------------------------------------------------------------------------------------------------------------------------
Henan Pingyuan Mining Machinery Co., Ltd is the most professional manufacturer of Belt conveyor, and Vibrating screenBucket elevatorScrew conveyorScraper conveyor using the world's most advanced technology, we are willing to serve every company to meet your custom needs. Our goal is "be the future global leader of mining machinery industry". Have any questions, please contact us without any hesitation.

没有评论:

发表评论