The Use Skill of Corrugated Sidewall Belt Conveyor

Corrugated sidewall belt conveyor is widely used in material handling industry. It has a lot of advantage, higher transportation capacity, the material is not easy to leak, slide prevention etc, it is welcomed by the masses of customers. So what are the use skill of corrugated sidewall belt conveyor in the process of using ?Here, Henan Pingyuan Mining Machinery Co., Ltd answers for you.
1.It is strictly prohibited to use different belt together.
2.The transport direction of the material and the dropping speed of material should be consistent with belt conveyor.
3.Non-load machine start, in order to avoid motor overload and large angle conveyor belt skid, before shutdown, all material should be unloaded completely.
4.When using corrugated sidewall belt, you should prevent belt folding and hard objects pressing, it should be curly using and preservation.
5.Corrugated sidewall belt tension should not be too big, please guarantee that it is used under the minimum tension.
6.In the using of corrugated sidewall belt, if there is a sliding or pulling up phenomenon, you should timely troubleshooting, adjust the tension system, keep the elastic device is flexible.
7.If there is belt deviation or sinusoidal running , you should adjust it timely.

Suggestions on Lubricating Points and System of Belt Conveyor

As we all know, regular maintenance and proper maintaining methods is essential in the daily operation of the belt conveyor.  Poor maneuverability would appear if the equipment has been used for long time, therefore we need to clean and lubricate the conveyor. Here our experts share some suggestions on the Lubricating points and methods with you.

  1.Lubricating Points

The lubricating points contains motor bearings, roller bearings, shaft sleeve bearings, bearing, gear reducer, the roller bearing and so on.

Roller is the most commonly used rotating parts of the belt conveyor, its quality and service life has a great influence on the belt conveyor running efficiency and reliability. The roller is equipped with bearing. Due to the gear reducer, its structure is relatively concentrated, with many parts needed lubrication, such as bearing pedestal, bearing gear and the meshing gear. In contrast, the structure of the roller bearing and motor bearings is relatively dispersed, especially the belt conveyor with long conveying distance. Each part is singly equipped with lubricating device.

2.Lubricating system

•  Manual lubrication system

The manual cleaning separator grease station should be installed in the center of the lubricating system. The distributer should be fixed in the device which needs lubrication, with its installing station convenient for observation and maintenance. Cold rolled seamless steel tube can be generally chosen as to the texture of the lubricating pipeline.

• Electric lubrication system

The electric lubrication is generally installed in the central part of the electric lubrication system, and usually need to set up special lubricating state with assurance of tidy and clean. The differential pressure switch is generally installed at the end of the main pipe line, behind the switch there should be installed a distributor. The piezometer however is commonly installed near the switch. The requirement for the texture is same as that of the Manual lubrication system.

How to Install a Portable Belt Conveyor Correctly？

Mobile rubber belt machine with wheels can be moved, as well as lifting devices, you can adjust the height of

 lift, is an efficient and convenient transportation equipment, can be used in warehouses, ports, terminals, stations,

 coal, mines, construction sites and other places.

movable belt conveyor

According to different needs of mobile belt conveyor can be customized with different bandwidths and different

 lengths.However, larger mobile belt conveyor, we usually belt removal during transport.Customers need to be 

assembled on the ground when they received the belt.Wire rope and belt installation to install the entire belt is 

very important.Wire rope and belt installation to correctly, will directly affect the belt lifting capacity and capab

ility.In order to showcase their trend of more intuitive full, we engineer deliberately drew the following drawings

as a reference:

PK Mining Machinery Company

 

Henan Pingyuan Mining Machinery Co., Ltd is the most professional manufacturer of Belt conveyor, and Vibrating screen, Bucket elevator, Screw conveyor, Scraper conveyor using the world's most 

advanced technology, we are willing to serve every company to meet your custom needs. our goal is "be the

 future global leader of mining machinery industry". have any questions, please contact us without any hesitation. 

   Tel: +86 373 579 9198

   Fax: +86 373 507 1699  

   info@pkmachinery.com  

   Address: 289 Yellow River Road, Xinxiang City, Henan Province, China