Three Types of Conveyor Belt Stretching

1. Elastic stretching
   1. Happens at the time of belt conveyor system acceleration or braking deceleration;
   2.  Happens at the time when pulling stress disappears, and can almost be fully recovered.

2. Structural stretching
   1. The possibility due to the conveyor belt fabric type is higher than that due to the textile type.
   2. In the fabrics that weaved according to traditional types, the frizzy

Yarn is easily to stretch when the belt conveyor system is loaded, certain part of this conveyor belt stretching is unable to be recovered.

3. Permanent change in length (permanent stretching)

Mainly caused by the fundamental fabric structure stretching, unrecoverable elastic stretching or structural stretching.

For more information, please visit http://www.pkbeltconveyor.com.

The application of conveyor belt fluid coupling

Fluid coupling is a used fluid transmission component. Motor drives coupling pump wheel rotation, pump impeller blade agitates intracavitary working liquid, under the centrifugal effect,pump wheel turns mechanical energy into liquid energy, then passes to the turbine blades, turbine passes the absorbent liquid energy to the machine.
Fluid coupling has the function of flexible transmission,slow down the impact and the isolation of torsional vibration, prolong the start-up time, reduce the starting current,make the motor light load start-up, solve the problem of heavy large inertia load start-up difficulties and protect the motor when overloads, energy and power saving effects are remarkable.
On the conveyor, fluid coupling has the function of connecting motor and reducer ,it replaces the mechanical coupling. The belt conveyor fluid coupling has two effects:
1.Overload protection
If the belt conveyor is overload, fluid coupling slip frequency increases, working fluid warms up, fluid coupling will spray without burning motor to a certain temperature. Of course sometimes coupling will be installed with a temperature control device, when work liquid superheats, temperature control device can control the motor and cut the power cut to protect the motor.
2. Flexible-start
When motor starts,belt conveyor starts slowly and acceleratedly , this can reduce the grid big impact to make the motor start up in light load. At the same time,it can reduce the effect of belt tension,protect belt and prolong life, especially under the heavy load start-up.

How to identify whether there is roller bearing fault or not?

As is known to all, roller is the main part of belt conveyor, while bearing is the precision part of roller, but in the process of using, bearing is the most prone to fail, then how to troubleshoot the problem? It is important to improve the productivity and economy if it can be identified and predicted by the not removal of the bearing in the operation. 

First of all, we can judge whether there is failure by sound, but this requires operators with rich experience and rigorous training to identify there is bearing noise;
Then, it can be judged according to the equipment temperature . There are some limitations of this method, we need to record temperature changes to determine whether the bearing fault or not only in the operating state;
Finally, when lubricate the bearing, we can also judge bearing whether there is fault or hidden trouble from dirty lubricant, if it is mixed with foreign matter ,other metal powder or dust, the bearing is bound to a fail.   

Follow the Right Operation of Fixed Belt Conveyor, Otherwise Accident will Occur

1.Fixed belt conveyor should be fixed in accordance with the specified installation methods on the foundation;
2.Before start-up ,please check all the moving parts of belt conveyor, such as if belt buckles and bearing device is normal, if the protective device is complete, if the belt tensioning condition is adjusted properly before start-up;
3. Fixed belt conveyor should no-load start up, only when operation is normal, can you feed the material, feed material before starting up the conveyor is not allowed;
4. when units of belt conveyor operate in series, please start from the discharged end in order, only when the operation is normal ,can you feed the material;

 

5. When belt deviation appeared in the operation of the belt conveyor, please stop the conveyor and adjust timely, so as not to wear edges and increase the load;
6. The work environment and material temperature should not be higher than 50℃ and lower than -10 ℃;
7. The conveyor must not convey people, and people is not allowed to stand under the conveyor;
8. Stop feeding material before stopping the conveyor, only after stored materials are discharged completely you can stop the conveyor;
9. Belt conveyor motor must be in good insulation;
10.Do not use your hand to pull the belt in order to avoid accidents when belt slips.